Explore our precision-engineered aluminum window and door systems designed with acoustic isolation, thermal breaks, and high-tensile frosted or clear tempered glass for residential and commercial developments across Special Capital Region of Jakarta.
Architectural requirements in Greater Jakarta (Jabodetabek) present a unique triad of environmental challenges: extreme relative humidity (often exceeding 85%), high diurnal solar radiance, and dense urban acoustic pollution. Deploying standard uninsulated or low-grade frosted glass leads to severe thermal bridging, condensation buildup inside building envelopes, high HVAC electricity consumption, and inadequate acoustic isolation along primary arterial roads like Jl. Jend. Sudirman and Gatot Subroto.
Our factory-engineered CE Certified frosted glass assemblies combine acid-etched translucent surfaces with double-glazed insulated glass units (IGU) and polyamide (PA66) thermal break aluminum frames. By maintaining surface temperatures above dew point, suppressing infrared radiation transmission (lowering SHGC to < 0.28), and incorporating dual EPDM weather seals, our glazing systems deliver optimal indoor environmental quality for modern Indonesian developments.
Custom-configured frosted glass and thermally isolated aluminum windows fulfilling privacy, light diffusion, and thermal control mandates in Jakarta’s premier commercial and luxury residential zones.
High-rise corporate interiors and executive boardroom partitions demand visual privacy without compromising daylight penetration. Our CE certified acid-etched double glazed panels eliminate harsh tropical glare while delivering STC 40+ acoustic isolation against Jakarta’s intense street traffic.
High-end residential villas require privacy along property boundaries and master bathroom envelopes. Thermally broken awning windows with frosted double glazing prevent exterior views from neighboring properties while maintaining continuous passive ventilation during tropical rain showers.
Sprawling suburban townships integrate commercial retail, healthcare facilities, and apartment complexes. Acid-etched tempered laminated glass panels withstand high wind loads and seismic activity while satisfying local building codes for safety and exterior façade privacy.
As Indonesia accelerates sustainability initiatives and urban modernization, building envelope specifications are shifting rapidly toward high-performance certified materials.
Architects in Jakarta are specifying low U-value thermal break frames to earn point credits under the Green Building Council Indonesia (GBCI) rating system, curbing AC operational energy usage by up to 32%.
Indonesian developers increasingly require international CE certification (EN 12150 tempered, EN 14449 laminated) alongside local Standar Nasional Indonesia (SNI) validation to mitigate structural liability risks on high-rise projects.
Luxury developments are adopting Polymer Dispersed Liquid Crystal (PDLC) switchable frosted glass embedded within double-glazed aluminum frames, switching instantly from clear transparency to opaque privacy via mobile apps or home automation systems.
With Jakarta’s ambient noise level often exceeding 75 dB near thoroughfares, asymmetrical laminated frosted glass build-ups (e.g., 6mm frosted + 1.52PVB + 8mm clear) are becoming mandatory specifications for residential comfort.
Detailed physical attributes, energy efficiency ratings, and structural parameters for architectural frosted glass configurations supplied to the Jakarta market.
| Glazing Type | Light Transmittance (VLT) | Solar Heat Gain (SHGC) | U-Value (W/m²K) | Acoustic Rating (STC) | Best Jakarta Use Case |
|---|---|---|---|---|---|
| Single Acid-Etched Tempered (6mm) | 82% | 0.74 | 5.7 | 31 dB | Interior office partitions, shower enclosures |
| Double Glazed Frosted IGU (6mm+12A+6mm) | 70% | 0.48 | 2.7 | 37 dB | Standard residential windows, mid-rise commercial |
| Low-E Double Frosted Thermal Break (6mm+16A+6mm) | 58% | 0.26 | 1.6 | 40 dB | High-rise facades, luxury villas in Jabodetabek |
| Laminated Frosted Soundproof (5mm+1.52PVB+5mm) | 65% | 0.52 | 3.1 | 42 dB | Street-facing hospital, clinic, & bedroom glazing |
| PDLC Smart Switchable Insulated Glass | 78% (On) / 5% (Off) | 0.32 | 1.8 | 39 dB | SCBD corporate boardrooms, VIP luxury suites |
Leveraging over 30 years of advanced aluminum extrusion, automated glass tempering, and rigorous quality control under international European standards.
We utilize primary 6063-T5 aluminum extrusions engineered with high wall thicknesses (1.4mm to 2.2mm) and reinforced Technoform Polyamide PA66 thermal barriers. This ensures structural frame integrity under extreme monsoon wind pressure and seismic loading.
Every batch of tempered, acid-etched, and laminated frosted glass undergoes rigorous factory testing, including pendulum impact tests (EN 12600), thermal shock resistance, and glass flatness measurement. Full mill test certificates (MTC) and CE documentation accompany every export crate.
Glazing products destined for Indonesia are packed in custom IPPC-certified fumigated wooden crates with moisture-absorbent desiccant packs, corner protectors, and heavy plastic shrink-wrap, guaranteeing zero ocean freight degradation during transit to Tanjung Priok, Jakarta.
Essential technical, logistical, and regulatory answers for architects, developers, and import contractors in Indonesia.
Yes. All our architectural glass products carry factory CE certification under EN 12150-1 (tempered safety glass) and EN 14449 (laminated glass). They fully satisfy structural, safety, and impact performance criteria required for SNI compliance and building approval by Jakarta’s regional planning authorities (Dinas Cipta Karya, Tata Ruang dan Pertanahan).
Jakarta experiences high humidity combined with intense thermal solar loading. Our double glazed frosted IGUs feature a dual-sealed warm-edge spacer filled with argon gas and integrated desiccant. This prevents internal frame condensation (sweating) while our Low-E coating reflects solar infrared energy, maintaining cooler indoor temperatures and reducing air-conditioning loads.
Custom aluminum frame extrusion, precision glass cutting, acid-etching, tempering, and IGU assembly typically require 3 to 4 weeks. Direct sea freight transit from our port facility to Tanjung Priok, Jakarta takes approximately 10 to 14 days, offering a total door-to-port timeline of around 5 to 6 weeks.
Absolutely. For coastal regions such as Pantai Indah Kapuk (PIK) and Ancol where salt spray causes rapid oxidation, we provide fluorocarbon (PVDF) powder coating and anodized surface treatments certified to Qualicoat Class 2 standards, backed by a 15-to-25 year warranty against corrosion and color fading.
Acid-etched frosted glass features a silky smooth surface created via chemical treatment, making it highly resistant to fingerprints, smudges, and dirt—ideal for humid Jakarta environments. Sandblasted glass creates a rougher mechanical texture that easily absorbs skin oils and requires significantly more maintenance. We recommend acid-etched processing for all premium exterior and interior applications.
Yes. Our engineering team prepares detailed AutoCad/BIM shop drawings, elevation schedules, hardware details, and structural wind load calculation reports tailored to Jakarta’s wind zone requirements for developer review and architect approval before production begins.
Consult with our structural glazing engineers today. We provide full technical assistance, shop drawing support, and factory-direct pricing for your project in Jakarta or Greater Jabodetabek.
Contact Us