Factory-direct thermally broken aluminum and high-density vinyl tilt & turn windows built to European CE & GOST technical standards.
Kazakhstan represents one of the most demanding thermal environments for architectural fenestration in Eurasia. From the bitterly cold, wind-swept steppes of Astana (Nursultan) and Karaganda where winter temperatures drop below -40°C, to the intensely sun-exposed urban basin of Almaty and the arid south of Shymkent reaching summer peaks above +40°C, building envelopes face an extreme 80-degree annual temperature differential.
Standard window profiles designed for mild European or coastal climates fail rapidly in Kazakhstan. Thermal bridging leads to severe interior frame frost, rubber seal embrittlement, structural bowing caused by uneven thermal expansion, and massive heat energy loss. According to Kazakh building energy compliance standards (SNiP RK 2.04-03-2002), high-efficiency building envelopes must strictly limit overall U-values. As a premier global vinyl tilt and turn windows supplier serving Kazakhstan, our engineering team custom-configures multi-chamber uPVC profiles specifically reinforced to eliminate winter thermal bridge leakage while resisting high steppe wind loads (Class C5 / 2000 Pa).
Integrated polyamide thermal break barriers and multi-cavity chamber designs prevent interior frame condensation and ice formation down to -45°C exterior temperatures.
Galvanized steel internal core reinforcements (up to 2.0mm thickness) provide exceptional structural integrity against extreme gust pressures across Northern Kazakhstan.
Multi-layered asymmetrical double or triple glass units with acoustic PVB interlayers dampen urban traffic sound in bustling metropolitan areas like Almaty.
Tilt and turn windows are the undisputed standard for modern architectural projects across Central Asia and Europe due to their dual-action functionality. Operated by a single ergonomic German hardware handle:
| Technical Spec Standard | 70mm 5-Chamber System | 80mm 6-Chamber (Sub-Zero Grade) | 88mm 7-Chamber Passivhaus Spec |
|---|---|---|---|
| Profile Depth / Frame Width | 70 mm profile depth | 80 mm profile depth | 88 mm profile depth |
| Insulation U-Value (Frame Uf) | 1.3 W/m²K | 1.0 W/m²K | 0.82 W/m²K |
| Glass Package Compatibility | 24mm - 32mm Double IGU | 36mm - 44mm Triple IGU | 48mm - 52mm Quad/Triple Low-E + Argon |
| Sealing Gasket Architecture | Dual EPDM perimeter seals | Triple EPDM gasket (Center Seal System) | Triple continuous weatherstripping + Co-extruded seal |
| Hardware Integration | Siegenia / Roto Frank Multi-point locking gear with Anti-Mishandling device | Siegenia / Roto Heavy-Duty Concealed Hinges (up to 150kg sash weight) | German RC2 / RC3 Burglar Resistance Multi-Point Security Gear |
| Steel Reinforcement Core | 1.5mm Zinc-Coated Box Steel | 2.0mm Thermally Broken Steel Insertion | 2.0mm Closed-Loop Heavy-Duty Steel Core |
*All window units exported to Kazakhstan undergo factory pressure-chamber seal testing and UV stability aging tests under ISO9001 quality management standards.
Building requirements differ dramatically across Kazakhstan’s vast economic zones. Our factory provides tailored glass configurations, structural frame dimensions, and lamination foils (such as Anthracite Grey, Golden Oak, and Dark Walnut) to match local regional construction trends:
Focus on seismic safety (Category 9 earthquake resilience ratings), acoustic damping for urban avenues, and solar-heat rejection Low-E coatings to offset intense summer mountain sun radiation.
Demands maximum thermal preservation (80mm+ profiles, triple argon glazing with warm-edge spacers) to resist brutal sub-zero winds and eliminate HVAC heating loss.
Optimized for solar control glass with Low-E coatings and high UV-resistant uPVC compound formulations that prevent frame yellowing or cracking under intense sunlight.
Requires salt-spray corrosion-resistant hardware coatings, heavy wind pressure resistance (EN 12210 Class C5), and water tightness under driving rain.
As a direct manufacturer with over 30 years of engineering expertise (originally founded by master fabricators and engineers), we eliminate intermediate trading markups while providing rigorous technical oversight. We understand the precise procurement workflow needed to ship smoothly into Kazakhstan.
Eliminate agent commissions. Benefit from direct engineering consultation, custom CAD shop drawings, and competitive bulk project pricing.
Windows are packed in steel-reinforced fumigated wooden crates with protective polyethylene film, corner guards, and moisture-absorbing desiccants.
Direct logistics routes via Khorgos / Altynkol land ports to Almaty, Astana, and Shymkent with complete customs documentation (Certificate of Origin, CE, ISO).
